# @file Astyle code automatic formatting settings
# @see http://astyle.sourceforge.net/astyle.html#_General_Information

#
# Java style uses attached braces.
#
# int Foo(bool isBar) {
#     if (isBar) {
#         bar();
#         return 1;
#     } else
#         return 0;
# }
#
--style=attach

#
# Indent using all tab characters, if possible. If a continuation line is not an even number of tabs,
# spaces will be added at the end. Treat each tab as # spaces (e.g. -T6 / --indent=force-tab=6).
# # must be between 2 and 20. If no # is set, treats tabs as 4 spaces.
#
--indent=force-tab=4

#
# Add extra indentation to namespace blocks. This option has no effect on Java files.
#
--indent-namespaces

#
# Indent multi-line preprocessor definitions ending with a backslash. Should be used with --convert-tabs for proper results.
# Does a pretty good job, but cannot perform miracles in obfuscated preprocessor definitions.
# Without this option the preprocessor statements remain unchanged.
#
--indent-preproc-define

#
# Indent C++ comments beginning in column one. By default C++ comments beginning in column one are assumed to be
# commented-out code and not indented. This option will allow the comments to be indented with the code.
#
--indent-col1-comments

#
# Indent, instead of align, continuation lines following lines that contain an opening paren '(' or an assignment '='.
# This includes function definitions and declarations and return statements.
# The indentation can be modified by using the following indent-continuation option.
# This option may be preferred for editors displaying proportional fonts.
#
--indent-after-parens

#
# Set the continuation indent for a line that ends with an opening paren '(' or an assignment '='.
# This includes function definitions and declarations. It will also modify the previous indent-after-paren option.
# The value for # indicates a number of indents. The valid values are the integer values from 0 thru 4.
# If this option is not used, the default value of 1 is used. 
#
--indent-continuation=1

#
# Set the minimal indent that is added when a header is built of multiple lines.
# This indent helps to easily separate the header from the command statements that follow.
# The value for # indicates a number of indents and is a minimum value.
# The indent may be greater to align with the data on the previous line.
# The valid values are:
# 0 - no minimal indent. The lines will be aligned with the paren on the preceding line.
# 1 - indent at least one additional indent.
# 2 - indent at least two additional indents.
# 3 - indent at least one-half an additional indent. This is intended for large indents (e.g. 8).
# The default value is 2, two additional indents.
#
--min-conditional-indent=0

#
# Set the  maximum of # spaces to indent a continuation line. The # indicates a number of columns and
# must not be less than 40 or greater than 120. If no value is set, the default value of 40 will be used.
# This option will prevent continuation lines from extending too far to the right.
# Setting a larger value will allow the code to be extended further to the right.
#
#--max-continuation-indent=40

#
# Indent labels so that they appear one indent less than
# the current indentation level, rather than being
# flushed completely to the left (which is the default).
#
--indent-labels

#
# This option improves indentation of C++ lambda functions. As it currently does not work well with
# complex lambda function bodies, this feature is not enabled by default. 
#
#--lambda-indent

#
# Attach a pointer or reference operator (*, &, or ^) to either the variable type (left) or variable name (right), or place it between the type and name (middle).
#
--align-pointer=type

#
# This option will align references separate from pointers. Pointers are not changed by this option.
# If pointers and references are to be aligned the same, use the previous align-pointer option.
#
--align-reference=type

#
# Add brackets to unbracketed one line conditional statements (e.g. 'if', 'for', 'while'...).
# The statement must be on a single line. The brackets will be added according to the currently requested predefined style or bracket type.
# If no style or bracket type is requested the brackets will be attached.
# If --add-one-line-brackets is also used the result will be one line brackets.
#
--add-braces

# Don't break complex statements and multiple statements residing on a single line.
#
#--keep-one-line-statements

#
# The option max?code?length will break a line if the code exceeds # characters.
# The valid values are 50 thru 200. Lines without logical conditionals will break on a logical conditional (||, &&, ...), comma, paren, semicolon, or space.
# Some code will not be broken, such as comments, quotes, and arrays. If used with keep?one?line?blocks or add-one-line-brackets the blocks will NOT be broken.
# If used with keep?one?line?statements the statements will be broken at a semicolon if the line goes over the maximum length.
# If there is no available break point within the max code length, the line will be broken at the first available break point after the max code length.
#
--max-code-length=128

#
# By default logical conditionals will be placed first on the new line.
# The option break?after?logical will cause the logical conditionals to be placed last on the previous line. This option has no effect without max?code?length.
#
#--break-after-logical

#
# Indent a C type, C#, or Java file. C type files are C, C++, C++/CLI, and Objective-C.  The option is usually set from the file extension for each file.
#
--mode=c

#
# Verbose display mode. Display optional information, such as release number, date, option file locations, and statistical data.
#
--verbose

#
# Formatted files display mode. Display only the files that have been formatted. Do not display files that are unchanged.
#
--formatted

#
# Force use of the specified line end style. Valid options are windows (CRLF), linux (LF), and macold (CR).
# MacOld style is the format for Mac OS 9 and earlier. OS X uses the Linux style.
# If one of these options is not used the line ends will be determined automatically from the input file.
# When redirection is used on Windows the output will always have Windows line ends. This option will be ignored.
#
--lineend=linux

#
# Insert space padding around operators. This will also pad commas. Any end of line comments will remain
# in the original column, if possible. Note that there is no option to unpad. Once padded, they stay padded.
#
--pad-oper

#
# Insert space padding between a header (e.g. 'if', 'for', 'while'...) and the following paren.
# Any end of line comments will remain in the original column, if possible.
# This can be used with unpad-paren to remove unwanted spaces.
#
--pad-header

#
# Remove extra space padding around parens on the inside and outside. Any end of line comments will remain in the original
# column, if possible. This option can be used in combination with the paren padding options pad-paren, pad-paren-out,
# pad-paren-in, and pad-header above. Only padding that has not been requested by other options will be removed.
# For example, if a source has parens padded on both the inside and outside, and you want inside only.
# You need to use unpad-paren to remove the outside padding, and pad-paren-in to retain the inside padding.
# Using only pad-paren-in> would not remove the outside padding.
#
--unpad-paren

#
# Remove padding around square brackets on both the outside and the inside. 
#
--unpad-brackets

#
# Remove superfluous empty lines exceeding the given number.
#
--squeeze-lines=1

#
# Remove superfluous whitespace
#
--squeeze-ws

#
# Attach the return type to the function name. The two options are for the function definitions (-xf),
# and the function declarations or signatures (-xh). They are intended to undo the --break-return-type options.
# If used with --break-return-type, the result will be to break the return type.
# This option has no effect on Objective-C functions.
#
--attach-return-type

#
# Closes whitespace between the ending angle brackets of template definitions.
# Closing the ending angle brackets is now allowed by the C++11 standard.
# Be sure your compiler supports this before making the changes.
#
--close-templates

#
# Do not retain a backup of the original file. The original file is purged after it is formatted.
#
--suffix=none

#
# Preserve the original file's date and time modified.
# The time modified will be changed a few microseconds to force the changed files to compile.
# This option is not effective if redirection is used to rename the input file.
#
--preserve-date